注塑级聚四氟乙烯 日本大金 注塑级PTFE  PTFE  Polymist® XPP 515-S塑料是东莞市双帮塑胶原料有限公司常年销售的塑料,因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告,COA原料出厂报告,UL黄卡,ROSH报告,reach报告,SVHC报告,提供原料注塑加工工程中可能出现的各种异常现象解决方法,塑料牌号太多,本网站没有提供的本公司也有代理,详情请咨询本公司相关业务人员0769-87795123

 
13549213581  肖生
 
粉状
Polymist® XPP 515-S
聚四氟乙烯
Solvay Specialty Polymers
Technical Data
产品说明
Polymist® XPP 515-S是一种聚四氟乙烯 (PTFE)材料,。 该产品在北美洲、欧洲或亚太地区有供货,。
Polymist® XPP 515-S的典型应用领域为:添加剂/色母粒
总体
材料状态 • 已商用:当前有效
资料 1 •  Technical Datasheet
搜索 UL 黄卡 •  Solvay Specialty Polymers
供货地区 • 北美洲 • 欧洲 • 亚太地区
用途 • Additive
外观 • 白色
形式 • 粉状
 
物理性能 额定值单位制 测试方法
Bulk Density 400g/l ASTM D4895
比表面积 3.0m²/g 内部方法
颗粒大小 - (D50) 20.0µm 内部方法
补充信息 额定值单位制 测试方法
Melt Temperature 320 到 330°C ASTM D3418
Processing
 
Polymist® XPP 515-S can be used in a wide variety of different thermoplastics. Typical loadings are 5 - 20% by weight of the compound and the optimum loading is dependent by the resin type and the desired final properties of the part.
 
Besides its main function as a friction and wear additive, Polymist® XPP 515-S micronized powders can be also used at lower concentration to provide the following properties:
• Processing aid to improve compounding and molding conditions
• Mold release agent due to non-stick properties
 
Polymist® XPP 515-S micronized PTFE can be incorporated into thermoplastics by pre-mixing or co-feeding with the base polymer using standard industrial equipment and technology. The compound can also be prepared by first using a masterbatch.
 
Storage and Handling
• The usual precautions for safe storage and handling of Polymist® XPP 515-S should be taken according to material safety documentation and experience. There will be no chemical deterioration of the Polymist® XPP 515-S during proper storage.
 
• Shelf life of Polymist® XPP 515-S micronized powders will vary depending upon whether the recommended storage conditions are maintained and whether the material remains free from foreign contamination during storage time (not exposed to dirt, dust, water or other chemicals). The material should remain sealed in the original containers and storage conditions should provide for protection from temperature extremes as well as rain, snow or other wet environments (or such conditions which may damage the storage containers in which the product is stored).
 
Safety and Toxicology
• Before using PTFE Polymist® XPP 515-S micronized powders consult the product Material Safety Data Sheet and follow all label directions and handling precautions.
 
• As with all PTFE materials, handling and processing should only be carried out in well ventilated areas. Vapor extractor units should be installed above processing equipment. Fumes must not be inhaled and eye and skin contact ought to be avoided. In case of skin contact wash with soap and water. In case of eye contact flush with water immediately and seek medical help. Do not smoke in areas contaminated with powder, vapor or fumes. See Material Safety Data Sheet for detailed advice on waste disposal methods.
 
Packaging
• Polymist® XPP 515-S is packaged in 25 kg non returnable drums. Each drum has one bag liner made of polyethylene resin.
 
 
注塑级聚四氟乙烯 日本大金 注塑级PTFE   PTFE  Polymist® XPP 515-S塑料是东莞市双帮塑胶原料有限公司常年销售的塑料,因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告,COA原料出厂报告,UL黄卡,ROSH报告,reach报告,SVHC报告,提供原料注塑加工工程中可能出现的各种异常现象解决方法,塑料牌号太多,本网站没有提供的本公司也有代理,详情请咨询本公司相关业务人员0769-87795123
 
13549213581  肖生