13549213581  肖生

 

耐化学性良好, FDA, 粉状, 压缩模塑

Algoflon® F 7

聚四氟乙烯

Solvay Specialty Polymers

Technical Data

 

产品说明

 

Algoflon® F 7是一种聚四氟乙烯 (PTFE)材料,。 该产品在北美洲、欧洲或亚太地区有供货,加工方式为:压缩模塑。 Algoflon® F 7的主要特性为:耐化学品。

 

典型应用领域包括:

• 添加剂/色母粒

• 食品接触应用

总体

材料状态 • 已商用：当前有效

资料 1 •  Technical Datasheet

搜索 UL 黄卡 •  Solvay Specialty Polymers

供货地区 • 北美洲 • 欧洲 • 亚太地区

性能特点 • 耐化学性良好

用途 • Additive • 混合

机构评级 • FDA 21 CFR 177.1550

外观 • 白色

形式 • 粉状

加工方法 • 压缩模塑

 

物理性能 额定值单位制 测试方法

比重 2.17 ASTM D792

Bulk Density 410g/l ASTM D4894

平均颗粒尺寸 3 15µm 内部方法

收缩性 - Radial 3.0% ASTM D4894

机械性能 额定值单位制 测试方法

Elongation at Break 400%

Tensile Strength 44.0MPa ASTM D4894

电气性能 额定值单位制 测试方法

介电强度 75kV/mm ASTM D149

 

Algoflon® F 7

聚四氟乙烯

Solvay Specialty Polymers

 

补充信息

Processing

• Algoflon® F 7 is processed according to methods generally used for normal compression molding. Prior to use, the powder must be conditioned above 19°C/66°F.

• The processing involves typically two steps: preforming and sintering. Initially the powder is compacted into a preform. This is then sintered using precise sintering (heating and cooling) cycle to take the temperature above the PTFE crystalline melting point to attain the final article. The preforming pressure, dwell time at maximum sintering temperature and cooling rate are all established according to the shape and size of the final item.

 

Storage and Handling

• Algoflon® PTFE fine cut powders must be stored and handled carefully to achieve defect-free molding. Before use the temperature of the powder must be conditioned above 19°C/66°F (between 21-27°C/70-81°F). Below this temperature the powder is difficult to mold without cracks. Temperatures that are too high should also be avoided to prevent powder lumping and poor flow.

 

• Storage and handling facilities should be clean since even very small foreign particles can cause defects in finished products. Keep resin drums closed and clean. Good housekeeping and careful handling are essential.

 

Safety and Toxicology

• Before using Algoflon® PTFE fine cut powders, consult the product Material Safety Data Sheet and follow all label directions and handling precautions.

 

• As with all PTFE materials, handling and processing should only be carried out in well ventilated areas. Vapour extractor units should be installed above processing equipment. Fumes must not be inhaled and eye and skin contact ought to be avoided. In case of skin contact, wash with soap and water. In case of eye contact, flush with water immediately and seek medical help.

• Do not smoke in areas contaminated with powder, vapour or fumes.

 

• See Material Safety Data Sheet for detailed advice on waste disposal methods.

 

Packaging

• Algoflon® F 7 is packaged in 25 kg nonreturnable drums. Each drum contains two bag liners made of polyethylene resin.

 

Additional Technical Information

• For Material Safety Data Sheet or additional technical information, consult your Solvay sales representative or the website: www.solvayspecialtypolymers.com

 

 

 

 

 

 

注塑级聚四氟乙烯 日本大金 注塑级PTFE   PTFE  Algoflon® F 7塑料是东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,UL黄卡,ROSH报告,reach报告,SVHC报告,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123

 

13549213581  肖生