3M™ Dyneon™

Fluoroplastic Granules

THV 815GZ

 

 

塑料是东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,UL黄卡,ROSH报告,reach报告,SVHC报告,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123

 

13549213581

Technical Data

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Features and Benefits

 

• Excellent flexibility

 

• High transparency

 

•Processing profile allows

 

co-processing with other

 

plastics and hydrocarbon

 

elastomers

 

• Excellent chemical

 

 

 

 

 

3M™ Dyneon™

Fluoroplastic Granules

THV 815GZ

 

 

Typical Properties

 

Property Test Method

Melting Point ASTM D4591 225°C (437°F)

Melt Flow Index 265°C/5 kg ASTM D1238 12 g/10 min

Specific Gravity ASTM D792 2.06 g/cm3

Tensile at Break ASTM D638 29 (4,210) MPa (psi)

Elongation at Break ASTM D638 420%

Flexural Modulus ASTM D790 525 (76,200) MPa (psi)

 

 

permeation resistance

 

• Bondable to itself and other

 

substrates (for mulit-layer

 

constructions)

 

 

 

 

 

 

 

 

 

Note: Data in this document are not for specification purposes.

 

 

Product Description

 

3M™ Dyneon™ Fluoroplastic Granules THV 815GZ provides a balance of low permeation, thermal stability, and melt processability. It can be used to prepare molded parts and extruded films, tubes, profiles and wire coatings. It is useful for applications that require flexibility and good chemical resistance. This product processes at higher temperatures than that of 3M THV grades; therefore, the use of corrosion-resistant equipment

 

is suggested.

 

Storage and Material Handling

 

Dyneon THV 815GZ has a shelf life of three years from date of manufacture provided it is stored in a clean, dry place in the original unopened container received from 3M. THV 815GZ is hydrophobic, and generally does not require drying before processing unless high humidity conditions create surface moisture adsorption.

 

 

Safety/Toxicology

 

This is a fluoroplastic material, so normal precautions observed with fluoroplastics should be followed. Before processing this product, be sure to read and follow all precautions and directions for use contained in the product label and the Material Safety Data Sheet. General handling/processing precautions include: (1) Process only in well-ventilated areas; (2) Do not smoke in areas contaminated with powder/residue from this product;

 

(3) Avoid eye contact; (4) After handling this product, wash any contacted skin with soap and water. Potential hazards, including evolution of vapors, can exist if processing occurs under excessively high temperature conditions. Appropriate local exhaust ventilation such as vapor extractor units should be installed above processing equipment. When cleaning processing equipment, do not burn off any of this product with an open flame or in

 

a furnace.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

 

 

 

 

 

 

东莞市双帮塑胶原料有限公司大量销售塑料注塑级THV 美国3M THV 

 

3M™ Dyneon™

Fluoroplastic Granules

THV 815GZ

 

 

 

 

因为塑料价格行情每天都有新的变化前天的报价不等于今天的报价。如果需要新的价格请电：13549213581，肖生。