3M™ Dyneon™ Fluoroplastic Granules THVP 2030GZ 

 

塑料是东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,UL黄卡,ROSH报告,reach报告,SVHC报告,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123

 

13549213581

Technical Data

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Features and Benefits

 

• Most flexible grade of THV 

 

• Bondable to itself and other substrants 

 

• E-beam crosslinkable 

 

• Low flammability 

 

• Highest transparency of the THV grades 

 

• Processing profile allows co-processing with other plastics, hydrocarbon elastomers and acrylics 

 

 

 

 

 

3M™ Dyneon™

Fluoroplastic Granules

THVP 2030GZ

 

 

Typical Properties

 

Property Test Method

Melting Point ASTM D4591 130°C (266°F)

Melt Flow Index 265°C/5 kg ASTM D1238 25 g/10 min

Specific Gravity ASTM D792 1.98 g/cm3

Tensile at Break ASTM D1708 23 MPa

Elongation at Break ASTM D1708 535%

Flexural Modulus ASTM D790, two inch span 32 MPa

Bulk Density ASTM D1895 950 g/l

Refractive Index 1.3502nd

UV-Visible Light Transmission/~10 mil film %T

220 nm 75

350 nm 90

500 nm 91

750 nm 92

 

 

 

 

 

Note: Data in this document are not for specification purposes.

 

 

Product Description

 

3M™ Dyneon™ Fluoroplastic Granules THVP 2030GZ is a very flexible, transparent fluoroplastic composed of fluorinated monomers. It is ideal for applications that require the good temperature, chemical and flame

 

resistance of a fluoropolymer, but need excellent flexibility or excellent transparency. Dyneon THVP 2030GZ is processed at low temperatures, but exhibits a slightly higher melt point and end-use temperature capability than 3M™ Dyneon™ THV 221Z. Typical applications are those requiring excellent optical transparency, such as fiber cladding, tubes and films, or those requiring excellent flexibility and spring-back such as peristaltic pump tubing and seals.

 

Storage and Material Handling

 

THVP 2030GZ has an extended shelf life provided it is stored in a clean, dry place. THVP 2030GZ is hydrophobic, and generally does not require drying before processing unless high humidity conditions create surface moisture adsorption.

 

 

Safety/Toxicology

 

This is a fluoroplastic material, so normal precautions observed with fluoroplastics should be followed. Before processing this product, be sure to read and follow all precautions and directions for use contained in the product label and the Material Safety Data Sheet. General handling/processing precautions include: (1) Process only in well-ventilated areas; (2) Do not smoke in areas contaminated with powder/residue from this product;

 

(3) Avoid eye contact; (4) After handling this product, wash any contacted skin with soap and water. Potential hazards, including evolution of vapors, can exist if processing occurs under excessively high temperature conditions. Appropriate local exhaust ventilation such as vapor extractor units should be installed above processing equipment. When cleaning processing equipment, do not burn off any of this product with an open flame or in

 

a furnace.

 

Product Form and Packaging

 

THVP 2030GZ pellets are supplied in 25 kg (55 Ib) polyethylene bags.

 

 

 

 

 

 

 

 

东莞市双帮塑胶原料有限公司大量销售塑料注塑级THV 美国3M THV 

 

3M™ Dyneon™ Fluoroplastic Granules THVP 2030GZ 

 

 

 

因为塑料价格行情每天都有新的变化前天的报价不等于今天的报价。如果需要新的价格请电：13549213581，肖生。