塑料是东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,UL黄卡,ROSH报告,reach报告,SVHC报告,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123

 

13549213581

Technical Data

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Features and Benefits

 

• Copolymer of VF2 and CTFE 

 

• Ultra-flexible 

 

• Very low shrinkage rates 

 

• Wide operating temperature window 

 

• Processable using a variety of thermoplastic conversion techniques 

 

• Excellent low flame and smoke performance 

 

 

Note: Data in this document are not for specification purposes.

 

 

 

 

 

 

3M™ Dyneon™

Fluoroplastic

 

PVDF 31008/0003

 

Typical Properties

 

Property Test Conditions Test Method

Density ISO 1183 1.76 g/cm3

H2O absorption 24 hr @ 23°C ISO 62 (method 1) <0.04%

Melt Flow Index 230°C, 5 kg ASTM D1238 15 g/10 min

230°C, 2.16 kg ASTM D1238 5 g/10 min

Tensile Strength at Break 23°C, 50 mm/min ASTM D638 56 MPa (8,122 psi)

Elongation at Break 23°C, 50 mm/min ASTM D638 630%

Flexural Modulus 23°C, 2 mm/min ASTM D790 800 MPa (116,000 psi)

Melting Point (Crystallinity by DSC) ASTM D3418 168°C (334°F)

Brittleness Temperature ASTM D 746A -30°C (-22°F)

Surface Resistivity, Voltage < 1V, ASTM D257

after 2 Minutes - 500V 23°C DIN 53483 >1014 ohm.square

Volume Resistivity, Intensity = ASTM D257

10 mA, after 2 Minutes 23°C DIN 53483 >1014 ohm.cm

Dielectric Constant 1 MHz ASTM D150 7

UL - 94 Flammability Test UL-94 V-O Class

Limiting Oxygen Index (LOI)(Sheet 3 mm Thick) ASTM D2863 65%

*Mechanical Properties based on Extruded Strips

 

 

Product Description

 

3M™ Dyneon™ PVDF 31008/0003 is a flexible copolymer of VF2 and CTFE, exhibiting very low shrinkage, and excellent impact resistance. PVDF 31008/0003 also has a very low brittleness temperature, for excellent

 

low temperature performance. This material is ideal for insulation and buffering materials for many wire and cable applications and for tubing. PVDF 31008/0003 has excellent flame and smoke performance, with an LOI of 60. PVDF 31008/0003 is designed for high speed extrusion, and can be processed using a variety of conventional thermoplastic conversion techniques. As with all PVDF grades, PVDF 31008/0003 also possesses very good chemical and temperature resistance.

 

Storage and Material Handling

 

PVDF 31008/0003 has an unlimited shelf life provided it is stored in a clean, dry place in its original, unopened container. PVDF 31008/0003 is hydrophobic, and

 

 

 

 

generally does not require drying before processing unless high humidity conditions create surface moisture adsorption.

 

Safety/Toxicology

 

This is a fluoroplastic material so normal precautions observed with fluoroplastics should be followed. Before processing this product, read the product label and Material Safety Data Sheet. Follow all precautions

 

and directions for use. General handling/processing precautions include: (1) process only in well ventilated areas, (2) do not smoke in areas contaminated with powder/residue from these products; (3) avoid eye contact; (4) after handling these products wash any contacted skin with soap and water.

 

 

 

3

 

 

 

 

 

 

 

 

东莞市双帮塑胶原料有限公司大量销售塑料注塑级PVDF 美国3M PVDF 3M™ Dyneon™ PVDF 31008/0003 

 

 

 

 

因为塑料价格行情每天都有新的变化前天的报价不等于今天的报价。如果需要新的价格请电：13549213581，肖生。