PFA 美国3M PFA 3M™ Dyneon™

Fluoroplastic Granules
PFA 6502UHPZ and PFA 6515UHPZ塑料是东莞市双帮塑胶原料有限公司常年销售的塑料,因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告,COA原料出厂报告,UL黄卡,ROSH报告,reach报告,SVHC报告,提供原料注塑加工工程中可能出现的各种异常现象解决方法,塑料牌号太多,本网站没有提供的本公司也有代理,详情请咨询本公司相关业务人员0769-87795123
 
13549213581
Technical Data
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Features and Benefits
 
Extremely low levels of metals 
 
Extremely low levels of fluoride ion and other anions 
 
Excellent chemical resistance and temperature capability up to 260°C (500°F) 
 
UHP packaged to assure clean, contamination-free product 
 
 
 
 
 
3M™ Dyneon™
Fluoroplastic Granules
PFA 6502UHPZ and PFA 6515UHPZ
 
Typical Properties
 
Property Test Method 6502UHPZ 6515UHPZ
Melting Point ASTM D4591 310°C (590°F) 310°C (590°F)
Melt Index 372°C/5 kg ASTM D1238 2 g/10 min 15 g/10 min
Specific Gravity ASTM D792 2.15 g/cc 2.15 g/cc
Tensile Strength at Break @ 23°C ASTM D638 30 MPa (4,350 psi) 26 MPa (3,770 psi)
Elongation at Break @ 23°C ASTM D638 380% 450%
Hardness Shore D ASTM 2240 60 60
Limiting Oxygen Index (LOI) ASTM D2863 >95% >95%
Flexural Modulus @ 23°C ASTM D790 550 MPa (80,000 psi) 620 MPa (90,000 psi)
Injection Molded Bars (0.5" × .125" × 5")
Vertical Burn UL Bulletin 94 V-0 V-0
 
 
 
 
 
Note: Data in this document are not for specification purposes.
 
 
Product Description
 
3M™ Dyneon™ PFA 6502UHPZ and PFA 6515UHPZ are a series of ultra-high purity fluorothermoplastics. These
 
resins were developed for high-purity applications requiring ultra-low levels of metal and ion extraction, such as in the semiconductor market. These grades can be extruded, injection-molded, compression-molded, transfer-molded, or blow-molded.
 
Product Form and Packaging
 
Dyneon PFA 6502UHPZ, and PFA 6515UHPZ are supplied in pellet form utilizing high purity packaging techniques. Product is supplied in 25 kg (55 lb.) quantities, and utilizes a sealed, heavy-duty plastic bag inside a lined polyethylene drum that provides structural integrity and convenient storage without cardboard fiber contamination. The
 
clean inner bag may be taken out and transferred into the molding area.
 
 
Food Contact/FDA Regulatory Status
 
These 3M products comply with 21 C.F.R. 177.1550 (perfluorocarbon resins) under paragraph (a)(2) and may be used as coatings or components of coatings for articles intended for repeated food contact use, subject to the provisions, including specifications, conditions of use, and limitations, if any, in this regulation.
 
3M makes no recommendation about the suitability of these 3M products in the user’s intended application. It is user’s responsibility to determine whether its use of 3M products in a particular application is suitable and will comply with applicable laws and regulations. As appropriate, the user is also responsible for testing its finished product(s) made with 3M products to ensure compliance with any applicable specifications, conditions of use, and limitations (including extractives limitations) under applicable laws and regulations such as 21 C.F.R. 177.1550.
 
 
Storage and Material Handling
 
PFA 6502UHPZ and PFA 6515UHPZ have an unlimited shelf life provided it is stored in a clean, dry place. PFA 6502UHPZ and 6515UHPZ are hydrophobic, and generally do not require drying before processing
 
unless high humidity conditions create surface moisture adsorption. Opened containers should be tightly resealed to prevent dust contamination from static charge accumulation and moisture ingress.
 
3
 
3M™ Dyneon™ Fluoroplastic Granules PFA 6502UHPZ and PFA 6515UHPZ
 
 
 
 
 
 
Safety/Toxicology
 
This is a fluoroplastic material, so normal precautions observed with fluoroplastics should be followed. Before processing this product, be sure to read and follow
 
all precautions and directions for use contained in the product label and the Material Safety Data Sheet and follow all label directions and handling precautions.
General handling/processing precautions include:
 
(1) Process only in well-ventilated areas; (2) Do not smoke in areas contaminated with powder/residue from this product; (3) Avoid eye contact; (4) After handling this product wash any contacted skin with soap and water. Potential hazards, including evolution of toxic vapors, can exist if processing occurs under excessively high temperature conditions. Appropriate local exhaust ventilation such as vapor extractor units should be installed above processing equipment. When cleaning processing equipment, do not burn off any of these products with an open flame or in a furnace.
 
 
 
 
 
东莞市双帮塑胶原料有限公司大量销售塑料美国3M PFA 3M™ Dyneon™
Fluoroplastic Granules
PFA 6502UHPZ and PFA 6515UHPZ
 
 
 
因为塑料价格行情每天都有新的变化前天的报价不等于今天的报价。如果需要新的价格请电:13549213581,肖生。