13549213581

Technical Data

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Features and Benefits

 

•Excellent electrostatics

 

•Excellent non-stick performance

 

•Outstanding flow and fluidization

 

•Good stress crack resistance

 

•Smooth surfaces

 

•Good transparency

 

•Non-wetting

 

•Heat resistant to 260°C (500°F)

 

•Low friction

 

•Chemical resistance

 

 

 

 

 

3M™ Dyneon™

 

Fluoroplastic Powder PFA 6503PAZ

 

Typical Properties

 

Property Test Method

Melting Point ASTM D4591 308°C (586°F)

Melt Flow Index (372°C/5 kg) ASTM D1238 3 g/10 min

Specific Gravity ASTM D792 2.15 g/cc

Bulk Density DIN 53466 800

Tensile Strength @ 23°C ASTM D638 30 MPa (4350 psi)

Ultimate Elongation @ 23°C ASTM D638 380%

Hardness Shore D ASTM D2240 60

LOI ASTM D2863 >95

Flexural Modulus ASTM D790 550 MPa (80,000 psi)

Median Particle Size 30µ

 

 

•Process target: powder coating

 

 

 

 

 

 

 

 

 

 

Note: Data in this document are not for specification purposes.

 

 

Product Description

 

3M™ Dyneon™ Fluoroplastic Powder PFA 6503PAZ is a fluorothermoplastic powder designed for use in thin film powder coatings. Typical applications include non-stick surfaces, chemical vessel and tank liners, electrical insulation and low friction applications.

 

Product Form and Packaging

 

Dyneon PFA 6503PAZ is supplied in powder form. Product is supplied in 50 kg (110 lb.) quantities.

 

Storage and Material Handling

 

PFA 6503PAZ has an extended shelf life provided it is stored in a clean, dry place in its original, unopened container. PFA 6503PAZ is hydrophobic, and generally does not require drying before processing unless high humidity conditions create surface moisture adsorption. Opened containers should be tightly resealed to prevent dust contamination from static charge accumulation and moisture ingress. Containers should be equilibrated to room temperature before opening. Best performance is achieved by sieving with a 60 mesh sieve prior to use.

 

 

Safety/Toxicology

 

This is a fluoroplastic material, so normal precautions observed with fluoroplastics should be followed. Before processing this product, be sure to read and follow all precautions and directions for use contained in the product label and the Material Safety Data Sheet. General handling/processing precautions include: (1) Process only in well-ventilated areas; (2) Do not smoke in areas contaminated with powder/residue from this product;

 

(3) Avoid eye contact; (4) After handling this product wash any contacted skin with soap and water. Potential hazards, including evolution of toxic vapors, can exist if processing occurs under excessively high temperature conditions. Appropriate local exhaust ventilation such as vapor extractor units should be installed above processing equipment. When cleaning processing equipment, do not burn off this product with an open flame or in a furnace.

 

 

 

 

3

 

3M™ Dyneon™ Fluoroplastic Powder PFA 6503PAZ

 

 

 

 

 

 

 

 

 

Food Contact/FDA Regulatory Status

 

This 3M product complies with 21 CFR 177.1550 (perfluorocarbon resins under paragraph (a)(2)) and may be used as coatings or component of a coating for articles intended for repeated food contact, subject to the provisions, including specifications, conditions of use, and limitations, if any, in this regulation.

 

3M makes no recommendation about the suitability of this 3M product in the user’s intended application. It is the user’s responsibility to determine whether its use of a 3M product in a particular application is suitable and will comply with applicable laws and regulations. As appropriate, the user is also responsible for testing its finished product(s) made with 3M products to ensure compliance with any applicable specifications, conditions of use, and limitations (including extractives limitations) under applicable laws and regulations such as 21. C.F.R. 177.1550.

 

 

 

 

 

 

 

东莞市双帮塑胶原料有限公司大量销售塑料美国3M PFA 3M™ Dyneon™ Fluoroplastic Powder PFA 6503PAZ

 

 

 

 

因为塑料价格行情每天都有新的变化前天的报价不等于今天的报价。如果需要新的价格请电：13549213581，肖生。