全氟乙烯丙烯共聚物 日本大金 FEP NP-102

 
塑料是东莞市双帮塑胶原料有限公司常年销售的塑料,因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告,COA原料出厂报告,UL黄卡,ROSH报告,reach报告,SVHC报告,提供原料注塑加工工程中可能出现的各种异常现象解决方法,塑料牌号太多,本网站没有提供的本公司也有代理,详情请咨询本公司相关业务人员0769-87795123
 
13549213581
Pr oduc t i  nf o r m a t io n
 
DAIKIN-NEOFLON ®FEP
 
 
Daikin FEP is a copolymer of tetrafluoroethylene (TFE) and hexafluoropropylene (HFP). DAIKIN-Neoflon® FEP consists of carbon atoms and fluorine atoms, as does PTFE, and has the molecular structure shown below. Daikin FEP has a lower melt viscosity than PTFE and
 
can be processed like other thermoplastic resins by the melt flow processes of extrusion, transfer, injection and compression molding. Because the bonding energy between its carbon and
 
fluorine atoms is so high, and the molecule is completely filled with fluorine atoms, Daikin FEP fluorocarbon polymer has excellent thermal, electrical, and chemical stability.
 
Thermal Properties:
Daikin FEP offers superior reliability and retention of its properties in a wide thermal range from
cryogenic to high temperature (-200°C to +200°C).
Chemical Properties: Daikin FEP maintains its physical properties in extreme environments. It provides excellent chemical
and permeation resistance including exposure to weathering, light, and moisture.
Electrical Properties: A low dielectric constant and dissipation factor exist along with high dielectric strength over a wide
range of frequencies and temperatures.
Low Friction: Daikin FEP offers the lowest critical surface energy of any plastic material in addition to excellen t
water and oil repellency for non-stick and mold release applications.
High Transparency: Products prepared from Daikin FEP are transparen t with good transmittance of both
ultraviolet and visible wavelengths; the lowest refracti ve index of any plastic and characterized
by very low light reflection.
 
 
 
 
 
 
 
 
 
Daikin America, Inc. 20 Olympic Drive, Orangeburg, New York (845) 365-9500 (800) 365-9570 Fax: (845) 365-9515 Web: www.daikin-america.com
 
DAIKIN-NEOFLON ®FEP
 
Pellets Daikin FEP molding materials are available in multiple grades supplied as translucent white pellets
for melt flow processes.
Property Test NP-20 NP-30 NP-40 NP-120 NP-130 NP-107 NP-101 NP-112 NP-102 NP-1105
Method
Bulk Density(g/l) 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200
Specific Gravity ASTM 2.12-2.17 2.12-2.17 2.12-2.17 2.12-2.17 2.12-2.17 2.12-2.17 2.12-2.17 2.12-2.17 2.12-2.17 2.12-2.17
D2116
MeltFlow Rate ASTM 4.5-8.5 2.0-3.5 0.75-1.8 4.0-8.0 2.0-3.6 15.6-20.0 21.0-27.0 9.0-14.0 23.0-30.0 19.0-26.0
(g/10min) D2116
Melting Point °C ASTM 265-275 265-275 265-275 260-270 250-260 250-260 250-260 250-260 250-265 245-270
D2116
ContinuousService 200 200 200 200 200 200 200 200 200 200
Temperature(°C)
Mechanical
Tensile Strength ASTM 19.6-34.3 19.6-34.3 19.6-34.3 19.6-34.3 19.6-34.3 19.6-34.3 19.6-34.3 19.6-34.3 19.6-34.3 19.6-34.3
(MPa) D2116
Elongation ASTM 300-400 300-400 300-400 300-400 300-400 300-400 300-400 300-400 300-400 300-400
(%) D2116
Compressive ASTM 5-6 5-6 5-6 5-6 5-6 5-6 5-6 5-6 5-6 5-6
Strength (MPa) D695
1 %
Deformation,
25°C
MIT Flex, cycles ASTM 5,000 30,000 250,000 30,000 200,000 8,000 5,000 12,000 5,000 5,000
D2176
Electrical
Dielectric ASTM 500-600 500-600 500-600 500-600 500-600 500-600 500-600 500-600 500-600 500-600
Breakdown D149
Strength (V/mil) Short time 1/8 in
Volume Resistivity ASTM <1018 <1018 <1018 <1018 <1018 <1018 <1018 <1018 <1018 <1018
(Ohm-cm) D257
Dielectric Constant ASTM D150
103 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1
106 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1
Dielectric ASTM D150
Dissipation 103 6x10-5 6x10-5 6x10-5 6x10-5 6x10-5 6x10-5 6x10-5 6x10-5 6x10-5 6x10-5
Factor 106 5x10-4 5x10-4 5x10-4 5x10-4 5x10-4 5x10-4 5x10-4 5x10-4 5x10-4 5x10-4
Combustibility ASTM >95 >95 >95 >95 >95 >95 >95 >95 >95 >95
(%) D2863/ Oxygen 
Concentration Index 
 
Process Extrusion Extrusion Extrusion Extrusion Extrusion Extrusion Extrusion Extrusion Extrusion Extrusion
Methods Injection Injection Injection Injection Injection Injection
Compression
Uses Wire and Heavy Films and Heavywall Heavywall Wire and High Wire and Wire and Wire and
cable wall wire sheets, wire wire cable speed cable cable cable
coatings, insulation, tubes,pipe insulation, insulation, coatings, wire and coating coating, coatings,
film,tube, tubes, & valve cable cable tube,small cable tube,small tubes,small
small parts cable linings, jacketing, jacketing, parts coatings parts parts
jacketing sleeves tubes pipe,
shrinkable
tubes
 
 
Daikin America, Inc. 20 Olympic Drive, Orangeburg, New York (845) 365-9500 (800) 365-9570 Fax: (845) 365-9515 Web: www.daikin-america.com
 
DAIKIN-NEOFLON ®FEP
 
Polymer Processing FEP can be molded by methods used by most thermoplastic resins, including extrusion, injection
of Daikin molding, blow molding, and compressi on molding
FEP Pellets
Molding Temperature
The molding temperature varies depending upon the method, but FEP is usually molded within
the range of 320 to 400°C.
Molding Machines
Extrusion and injection molding machines with outstanding heat and corrosion resistance are required
for molding FEP. For screws, breaker plates, dies, etc., high Ni-alloy, Hastelloy C (available from
Mitsubishi Material), Duranikel or their equivalents are recommended. For the cylinder inner surfaces,
X-alloy (available from the Japan Steel Works) and X-alloy (available from Hitachi Metals) or their
equivalents are recommended.
Colorant
Where moldings must be colored, colorants with heat stability above 400°C must be used. There are
two methods for blending colorants: dry blend and master batch. In general, the master batch
method disperses more easily. Master-batch pellets are available in 10 colors. Good colored moldings
can be obtained by adding Daikin FEP NP-20 in quantities of 5 to 10 times the colorant and
molding by extrusion.
Dispersions Daikin FEP dispersio ns are fine-powder suspensi ons. Since FEP has good flowability when melted,
a continuous, pinhole-free film can be obtained.
Product No. Color Specific Solid Content Viscosity pH Major Uses
Gravity (25°C) (mass %) (mPa.s at 25 °C)
ND-110 Translucent, 1.40-1.43 52.5-54.5 10-30 8-9 Glass fabric and
white liquid glass mat coating,
film casting, spray coating, and release coating formulations
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Daikin America, Inc. 20 Olympic Drive, Orangeburg, New York (845) 365-9500 (800) 365-9570 Fax: (845) 365-9515 Web: www.daikin-america.com
 
DAIKIN-NEOFLON ®FEP
 
 
 
Coating Powders Daikin FEP coating powders are design ed for high build coatings having excellent resistance to
chemical and corrosive environments.
Product No. Color Bulk Density Description Processing Methods
NC-1500 White 530 Up to a thickness of 100 µm Electro-static spray coating
per single coat Fluidized bed coating
NC-1539 Gray 530 Multiple coats, up to 2,000 µm Electro-static spray coating
Fluidized bed coating
NC-1810 White 750 0.5-5.0mm thickness Roto lining
NC-1830 Gray 750 0.5-5.0mm thickness Roto lining
Quality/Regulatory: Daikin FEP pellets comply with the requirements set forth in FDA specification 21 CFR.177.1550
Daikin America’s manufacturing facility is registered to ISO-9001 (Quality System),
ISO-14001 (Environmental System) and Responsible Care 14001 (Safety, Health, Environment
and Security).
Safety: When FEP resins are heated to temperatures above 260°C, some decompositi on products
may be given off.  These decomposition produc ts may be harmful , and inhalati on of these fumes
must be avoided. Ovens, process equipment and working area must be adequately
ventilated. For further information, please refer to the material safety data sheet for these
products and the Guide to the Safe Handling of Fluoropolymer Resins published
by SPI Inc., The Society of Plastics Industry, Inc., 1801 K Street, NW, Suite 600K, Washington,
DC, 20006-1301 (202-972-5200).
.
Medical Use: These products are not specifically designed or manufactured for use in implantable medical
and/or dental devices. They have not been tested for such applications and will only be sold for such
use pursuant to contract containing specific terms and conditions required by us.
 
 
 
 
 
 
 
 
 
All statements, information and data given herein are believed to be accurate and reliable, but are presented without guarantee, warranty or responsibility of any kind, expressed or implied. Statements or suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement, and are not recommendations to infringe any patent. The user should not assume that all safety measures are indicated, or that other measures may not be required.
 
 
 
2.14.250
 
 
 
 
 
东莞市双帮塑胶原料有限公司大量销售塑料全氟乙烯丙烯共聚物  日本大金  FEP NP-102
 
因为塑料价格行情每天都有新的变化前天的报价不等于今天的报价。如果需要新的价格请电:13549213581,肖生。                      
 
 
 
 
 
 
 
 
 
 
 
 
因为塑料价格行情每天都有新的变化前天的报价不等于今天的报价。如果需要新的价格请电:13549213581,肖生。