FEP 美国3M FEP 3M™ Dyneon™

Fluoroplastic Granules
FEP 6301Z, FEP 6303Z and FEP 6307Z
 
 
 
 
塑料是东莞市双帮塑胶原料有限公司常年销售的塑料,因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告,COA原料出厂报告,UL黄卡,ROSH报告,reach报告,SVHC报告,提供原料注塑加工工程中可能出现的各种异常现象解决方法,塑料牌号太多,本网站没有提供的本公司也有代理,详情请咨询本公司相关业务人员0769-87795123
 
13549213581
Technical Data
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Features and Benefits
 
Excellent electrical properties 
 
High thermal stability 
 
Long term temperature rating up to 200°C 
 
Outstanding chemical resistance 
 
Wide processing window 
 
 
 
 
 
3M™ Dyneon™
Fluoroplastic Granules
FEP 6301Z, FEP 6303Z and FEP 6307Z
 
Typical Properties
 
Property Test Method FEP 6301Z FEP 6303Z FEP 6307Z
Melt Flow Index (372°C/5 kg) ASTM D1238 1 g/10 min 3 g/10 min 7 g/10 min
Specific Gravity ASTM D792 2.14 g/cm3 2.15 g/cm3 2.15 g/cm3
Melting Point ASTM D4591 260°C (500°F) 260°C (500°F) 260°C (500°F)
BrittlenessTemperature ASTM D746 <-70°C (<-94°F) <-70°C (<-94°F) <-70°C (<-94°F)
Tensile Strength at Break (23°C) ASTM D638 30 MPa (4,350 psi) 28 MPa (4,060 psi) 25 MPa (3,625 psi)
Elongation at Break (23°C) ASTM D638 350% 350% 350%
Flexural Modulus ASTM D790   530 MPa (77,000 psi) 580 MPa (84,000 psi) 580 MPa (84,000 psi)
Izod Impact (notched, -40°C) ASTM D256 No Break No Break No Break
Dielectric Strength (4.5 mil film) ASTM D149 2.6 kV/mil
Dielectric Constant ASTM D150 2.15 @ 1 kHZ 2.15 @ 1 kHZ
(2.15 @ 1MHz) (2.15 @ 1MHz)
Dissipation Factor ASTM D150 <0.0003 kHz <0.0003 kHz <0.0003 kHz
0.0007 MHz 0.0007 MHz 0.0007 MHz
Vertical Burn (UL94) UL Bulletin 94 V-0 V-0 V-0
Limiting Oxygen Index (LOI) ASTM D2863 >95% >95% >95%
 
 
 
 
 
 
Note: Data in this document are not for specification purposes.
 
 
 
 
Product Description
 
3M™ Dyneon™ Fluoroplastic Granules FEP 6301Z, FEP 6303Z and FEP 6307Z are offered for extrusion, injection molding and transfer molding for the wire and cable and chemical process industries.
 
Product Form and Packaging
 
These products are supplied in pellet form. FEP 6301Z is packaged in 110 lb (50 kg) PE bags in a box; FEP 6303Z is packaged in either 110 lb (50 kg) PE bags in a box or 550 lb (250 kg) HDPE drums with a moisture and dust-proof PE liner; FEP 6307Z is packaged in 55 lb (25 kg) PE bags.
 
Storage and Material Handling
 
FEP 6301Z, FEP 6303Z and FEP 6307Z have an unlimited shelf life provided they are stored in a clean, dry place in the original unopened container received from 3M.
 
FEP 6301Z, FEP 6303Z and FEP 6307Z are hydrophobic, and generally do not require drying before processing unless high humidity conditions create surface moisture adsorption.
 
 
 
 
Food Contact/FDA Regulatory Status
 
FEP 6301Z, FEP 6303Z and FEP 6307Z comply with 21 CFR 177.1550 (perfluorocarbon resins under paragraph (a)(1)) and may be used as articles or components of articles intended to contact food, subject to the provisions, including specifications, conditions of use, and limitations, if any, in this regulation.
 
3M makes no recommendation about the suitability of these 3M products in the user’s intended application. It is user’s responsibility to determine whether its use of 3M products in a particular application is suitable and will comply with applicable laws and regulations. As appropriate, the user is also responsible for testing its finished product(s) made with 3M products to ensure compliance with any applicable specifications, conditions of use, and limitations (including extractives limitations) under applicable laws and regulations such as
 
21 C.F.R. 177.1550.
 
 
3
 
3M™ Dyneon™ Fluoroplastic Granules FEP 6301Z, FEP 6303Z and FEP 6307Z
 
 
 
 
 
Safety/Toxicology
 
This is a fluoroplastic material, so normal precautions observed with fluoroplastics should be followed. Before processing this product, be sure to read and follow all precautions and directions for use contained in the product label and the Material Safety Data Sheet. General handling/processing precautions include: (1) Process only in well-ventilated areas; (2) Do not smoke in areas contaminated with powder/residue from this product;
 
(3) Avoid eye contact; (4) After handling this product, wash any contacted skin with soap and water. Potential hazards, including evolution of vapors, can exist if processing occurs under excessively high temperature conditions. Vapor extractor units should be installed above processing equipment. When cleaning processing equipment, do not burn off any of this product with an open flame or in a furnace.
 
 
 
 
 
 
东莞市双帮塑胶原料有限公司大量销售塑料美国3M FEP 3M™ Dyneon™
Fluoroplastic Granules
FEP 6301Z, FEP 6303Z and FEP 6307Z
 
 
 
 
因为塑料价格行情每天都有新的变化前天的报价不等于今天的报价。如果需要新的价格请电:13549213581,肖生。