Fluoroplastic Granules

FEP 6307R2RZ

 

 

塑料是东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,UL黄卡,ROSH报告,reach报告,SVHC报告,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123

 

13549213581

Technical Data

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Features and Benefits

 

• Excellent electrical properties 

 

• Excellent low smoke and flame properties 

 

• Contains incorporated foam nucleant 

 

 

 

 

 

3M™ Dyneon™

Fluoroplastic Granules

FEP 6307R2RZ

 

Typical Properties

 

Property Test Method

Melt Flow Index (372°C/5 kg) ASTM D1238 7.5 g/10 min

Specific Gravity ASTM D792 2.15 g/cm3

Melting Point ASTM D4591 260°C (500°F)

Dielectric Constant ASTM D150 ≤2.15 @ 1kHz ( ≤2.15 @ 1MHz)

Dissipation Factor ASTM D150 <0.0003 kHz (≤0.0009 MHz

Limiting Oxygen Index (LOI) ASTM D2863 >95%

 

 

 

 

Note: Data in this document are not for specification purposes.

 

 

Product Description

 

3M™ Dyneon™ Fluoroplastic Granules FEP 6307R2RZ is a special version of 3M™ Dyneon™ Fluoroplastic Granules FEP 6307Z with an added nucleating agent for improved foaming in gas injection extrusion processes. As the gas expands and begins to form voids, the added nucleating agent in FEP 6307R2RZ acts as a site for void formation. FEP 6307R2RZ is listed by Underwriters Laboratories as a Plenum Cable Component. FEP 6307R2RZ is ideal for gas injection extrusion of foamed FEP coaxial cable core.

 

Product Form and Packaging

 

This product is supplied in pellet form in 550 pound

 

(250 kg) HDPE drums with a moisture and dust-proof liner.

 

Storage and Material Handling

 

FEP 6307R2RZ has an unlimited shelf life provided it is stored in a clean, dry place. FEP 6307R2RZ is

 

hydrophobic, and generally does not require drying before processing unless high humidity conditions create surface moisture adsorption.

 

 

Safety/Toxicology

 

This is a fluoroplastic material, so normal precautions observed with fluoroplastics should be followed. Before processing this product, be sure to read and follow all precautions and directions for use contained in the product label and the Material Safety Data Sheet. General handling/processing precautions include: (1) Process only in well-ventilated areas; (2) Do not smoke in areas contaminated with powder/residue from this product;

 

(3) Avoid eye contact; (4) After handling this product, wash any contacted skin with soap and water. Potential hazards, including evolution of vapors, can exist if processing occurs under excessively high temperature conditions. Vapor extractor units should be installed above processing equipment. When cleaning processing equipment, do not burn off any of this product with an open flame or in a furnace.

 

 

 

 

 

 

 

 

 

 

 

 

 

3

 

 

 

 

 

 

 

 

 

东莞市双帮塑胶原料有限公司大量销售塑料美国3M FEP 3M™ Dyneon™

Fluoroplastic Granules

FEP 6307R2RZ

 

 

因为塑料价格行情每天都有新的变化前天的报价不等于今天的报价。如果需要新的价格请电：13549213581，肖生。